Safety Testing Results

Baby safety is our #1 priority. Chikiroo® Wearable Changing Station has passed independent safety testing for the U.S. market to be safely used for babies between 6 lb to 30 lbs or 2.7 kg to 13.6 kg. We passed the applicable Performance and Reliability testing for straps, buckle and harnesses, Chemical testing and Flammability testing. See below for the list of standards tested on submitted samples and components.

Test Results

  • ✅ PASSED

    ASTM F2236 – 16a standard consumer safety specification for soft infant and toddler carriers

    --Clause 6.2 Dynamic and static load

  • ✅ PASSED

    Fastener strength and strap retention - With reference to ASTM F2236-16a clause 6.4

  • ✅ PASSED

    Structural integrity - With reference to ASTM F2388-21 clause 6.1

  • ✅ PASSED

    Restraint system - With reference to ASTM F2388-21 clause 6.8

  • ✅ PASSED

    U.S. CFR title 16(CPSC regulations) part 1226 safety standard for soft infant and toddler carriers

  • ✅ PASSED

    U.S. CFR title 16 (CPSC regulations) part 1500.3(c)(6)(vi) flammability test on rigid and pliable solids

  • ✅ PASSED

    U.S. Code of Federal Regulations title 16 part 1303 for total Lead content in surface coating

  • ✅ PASSED

    U.S. Consumer Product Safety Improvement Act 2008 title I, section 101 for total Lead content in surface coating

  • ✅ PASSED

    U.S. Consumer Product Safety Improvement Act 2008 title I, section 101 and its amendment for total Lead content in nonsurface coating materials (substrate)

  • ✅ PASSED

    15 U.S.C. Sec. 1278a - Total Lead Content

  • ✅ PASSED

    US Consumer Product Safety Improvement Act 2008 Title I, Sec 108(a) & (b)(3) and US 16 CFR Part 1307 for Prohibition of Children’s Toys and Child Care Articles Containing Specified Phthalates

  • Straps Reliability Testing — ✅ PASSED

    The lab fixed the product as it normal use, center a 6 by 6 in. (150 by 150 mm) wood block on the changing surface and gradually apply a 100 lb (45.4 kg) weight onto the wood block within a period of 5 s. Maintain the weight for an additional period of 60 s. After test, there shall be no breakage of the unit. The attachment of the strap shall not break. The fastener shall not break or disengage.

  • Fastener Strength Testing — ✅ PASSED

    The lab attached clamps on either side of the fastener. Clamps shall not contact the fastener when a 1.0 lbf (4.4 N) tensile pre-load is applied. Gradually apply a uniaxial tensile force of 80 lb (352 N) over 5 s to the straps or soft goods on either side of the fastener. The force should be applied in substantially the same direction as loads applied during use. Hold for 1 min. After test, the fastener shall not break or disengage, and adjustable elements in straps shall not slip, in a manner that loosens the strap, more than 1 in. (2.5 cm).

All applicable independent safety tests were conducted by the U.S. Consumer Product Safety Commission (CPSC) accredited testing lab Intertek Testing Services (Tianjin) Ltd. — Lab ID 1063